Vivo Y15/Y12 PD1901BF Tested Flash File – 100% Working Firmware
If your Vivo Y15 or Vivo Y12 (PD1901BF) is facing software issues, boot loops, or system crashes, flashing the stock firmware can restore its original state. This guide provides a tested flash file for Vivo Y15/Y12 to fix issues and improve performance. Learn how to download, install, and use the firmware properly.
🛠Vivo Y15/Y12 PD1901BF Flash File Details
✔ Device Name: Vivo Y15/Y12
✔ Model Number: PD1901BF
✔ Android Version: 9.0 (Pie)
✔ Firmware Version: PD1901BF_EX_A_6.72.12 shared by GD_Mekail92
✔ File Type: Stock ROM (Official Firmware)
✔ File Format: ZIP / Scatter File
✔ Password: flashfile92
✔ File Size: ~2.5GB
✔ Tested: Yes, 100% Working[IF Not Works You Need To Refer To Expert Technicians For Any Other Fault Like Bad Emmc]
🔗 Download Link: Click Here PD1901BF_EX_A_6.72.12 Tested flash file by Mekail92
📥 Download Vivo Y15/Y12 PD1901BF Flash File
📌 How to Flash Vivo Y15/Y12 PD1901BF?
- ✅ Download the tested flash file and extract it.
- ✅ Install **MTK USB Drivers** on your PC.
- ✅ Open **SP Flash Tool** and load the scatter file.
- ✅ Click on **Download** and connect the device in Flash Mode.
- ✅ Wait for the flashing process to complete.
- ✅ Once the flashing is done, disconnect the phone and restart.
📌Why Flash Vivo Y15/Y12?
Flashing the stock ROM can resolve multiple issues, including:
✅ Bootloop Fix – If your phone is stuck at the logo, flashing will restore it.
✅ FRP Bypass – Removes Google FRP lock after a hard reset.
✅ System Bugs Fix – Solves lags, software crashes, and slow performance.
✅ Unbrick Device – If your phone is dead or stuck, flashing can bring it back.
🔗Tools & Drivers Required for Flashing
Before starting the flashing process, download and install these essential tools:
🔹 SP Flash Tool – Download Here [Using Brom Mode]
🔹 MTK USB Drivers – Download Here
🔹 Can Also Flash With Supported Tools Like Cm2,Umt,Etc
🔹 Vivo Fastboot Drivers – Download Here
How to Flash Vivo Y15/Y12 PD1901BF Firmware?
Follow these steps carefully to flash your Vivo Y15/Y12:
1️⃣ Backup Data – Save all important files before flashing.
2️⃣ Extract Firmware – Download and extract the flash file on your PC.
3️⃣ Install Drivers – Install MediaTek USB Drivers to detect your device.
4️⃣ Open SP Flash Tool – Launch SP Flash Tool as Administrator.
5️⃣ Load Scatter File – Click “Choose” and select the MT6765_Android_scatter.txt file.
6️⃣ Connect Phone – Power off your device and connect it using a USB cable while holding the Volume Down button.
7️⃣ Start Flashing – Click “Download” and wait for the process to complete.
8️⃣ Reboot Device – Once finished, disconnect and restart your phone. Or Can Use Flashing Dongle Or Tools.
🔴 Warning: Flashing a wrong firmware can brick your device. Always verify the firmware version before proceeding.
❓ FAQs About Vivo Y15/Y12 Flash File
🔹 What is the use of the Vivo Y15/Y12 flash file?
The flash file is used to repair software issues, remove FRP, fix boot loops, and restore the original ROM.
🔹 Can I use this firmware on any Vivo Y15/Y12 variant?
No, this firmware is only for Vivo Y15/Y12 PD1901BF. Do not flash on other models.
🔹 Will flashing remove my phone’s data?
Yes, flashing will erase all data. Backup your important files before proceeding.
🔹 How long does the flashing process take?
Flashing usually takes 5-10 minutes, depending on your PC and connection.
🔹 Is the flash file free or paid?
This tested flash file is 100% free and available for direct download.[If Ask Password Use: flashfile92 ]
📥 Conclusion
The Vivo Y15/Y12 PD1901BF Tested Flash File provided here is officially tested and confirmed working. If you’re facing **bootloop, stuck logo, or dead boot**, this firmware can help restore your device.
⭐ Need help? Comment below, and I will assist you! – GD_Mekail92
📢 Stay connected with FlashFile92 for more firmware updates and unlocking solutions.
